URAL ENGINEERING CENTER
Ural Engineering CenterHome Contacts Sitemap rus | eng
Loading

Mobile Oil and Lubricants Conditioning System


Cheltec specialists design and manufacture mobile oil and lubricants conditioning systems which allow to remove water and mechanical impurities from oil and lubricants.

There are two stages of system operation: vacuum treatment and filtration of fluid.


Stage 1
Vacuum treatment up to 7…15 kPa in the gas-liquid ejector (oil and air supplied to the ejector are pre-heated using electrical heaters), and water evaporation;

Stage 2
Vapor removal using gas ejector.

The system includes two pump units, suction and pressure oil filters, oil and air heaters, vacuum tank, gas and liquid ejectors and air preparation system.


Specifications
:


Description
Value
Oil specifications
Kinematic viscosity at 400 º, cSt
20…80
Temperature, º
40…70
Max permissible water content, %
≤ 5
Flow (untreated oil), l/min
40
Water removal flow, l/min
≤ 60
Operating principle
circulation
Oil heater wattage, kW
7.5
Air heater wattage, kW
30.5
Pump unit
Nominal pressure, MPa
16
Nominal flow, l/min
42.9
Drive motor wattage, kW
1.5
Min permissible pressure of compressed air supply, MPa
0.4
Vacuum gauge operating pressure in the vacuum tank, kPa
30
Min permissible oil input pressure, kPa
10
Vacuum tank volume, m3
0.019
Dimensions, mm
770x1,250x1,500